通风管道加工需要注意哪些事项？

发布人：http://www.sftfgd.com   发布时间：2018-04-17 20:26:48

济南顺发通风管道工程是一家致力于为广大消费者提供济南通风管道，空调风管、消防排烟风管、镀锌风管等产品的机构。公司不仅产品种类齐全，配套性强，适应面宽，而且可以为用户提供完整的技术支持及工程解决方案。同时公司拥有一支强大的生产研发队伍，以满足不同客户需求并确保公司的技术及产品始终保持行业地位。

Ji'nan Shun Fa ventilation pipeline project is a professional organization dedicated to providing high quality Ji'nan ventilation pipe, air conditioning wind pipe, fire exhaust pipe, galvanized wind pipe and other products for the majority of consumers. The company not only has a complete range of products, strong matching, wide adaptability, but also can provide users with complete technical support and engineering solutions. At the same time, the company has a strong R & D team to meet different customer needs and ensure that the technology and products of the company always maintain the leading position in the industry. 

在建筑业快速发展的现在，高层建筑越来越多，为了保护在内工作人员的身体健康，通风管道的运用也多了起来，在给通风管道加工时，有很多事项要注意，下面主要是一些常见的问题：

In the rapid development of the construction industry now, more and more high-rise buildings, in order to protect the health of the staff, the use of ventilation pipes is also more, in the processing of ventilation pipes, there are many issues to pay attention to, the following are a number of common problems:

通风管道加工的过程中应该尽量避免出现纵向接缝，但是不能出现横向接缝，而且通风管道的咬口缝和四角的缝隙处，需要按照设计洁净等级要求，然后还要采用密封胶将其堵严。另外通风管道板材的连接缝的密封面应该设在通风管道壁的正压侧，通风管道加工不能采用S型插条和C型直角插条的连接方式，另外对于一些特殊的通风管道来说，还不能采用按扣式的咬口，如果是彩色涂层钢板通风管道的话，应该保持内壁是光滑的，而且通风管道加工的过程中，还不能将涂层损坏，若是出现损坏的部位，需要用环氧树脂涂刷在表面即可。

The longitudinal joint should be avoided in the process of the ventilation pipe processing, but the transverse joint must not appear, and the slot seam of the ventilation pipe and the gap in the four corner should be designed according to the requirements of the design cleanliness, and then the sealant will be used to block it. In addition, the sealing surface of the joint joint of the ventilation pipe plate should be located on the positive pressure side of the ventilation pipe wall. The ventilation pipe can not be processed by the connection mode of the S bar and the C right angle bar. In addition, for some special ventilation pipes, the button type bite is not used, if the fruit is a color coated steel plate ventilation pipe. The inner wall should be kept smooth and the coating can not be damaged during the processing of the ventilation pipe. If the damaged parts appear, the epoxy resin should be painted on the surface.

另外通风管道加工的过程中，还要做好防腐蚀措施，不能使用抽芯铆钉，而且在通风管道零件装配的时候，这些零件都要经过镀锌处理才行，加工的时候，不能在通风管道内部设置加固框或者加固筋，因为这样对于通风管道的质量会造成一定的影响，通风管道制作完毕之后，还要用清洗液进行清洗，只有达到清洗标准之后，才可以及时封口，如果做到以上问题不出错的话，在给通风管道加工时应该没有多大问题。

In addition, in the process of the ventilation pipe processing, we should do a good job of anti-corrosion measures, can not use the core rivet, and when the parts of the ventilation pipe are assembled, these parts must be galvanized. When processing, the reinforcement frame or reinforcement can not be set in the ventilation pipe, because this is the case for the ventilation pipe. Quality will cause a certain impact, after the production of the ventilation pipe, but also use the cleaning liquid cleaning, only after the cleaning standard, can be timely sealed, if the above problems do not make mistakes, in the ventilation pipe processing should not have many problems.

想了解更多关于济南通风管道知识请关注济南顺发通风管道工程 http://www.sftfgd.com/ 欢迎来电详细咨询。

For more information on ventilation pipe in Ji'nan, please pay attention to Ji'nan Shun Fa ventilation pipe project http://www.sftfgd.com/. Welcome to call for detailed consultation.