你知道不锈钢螺旋风管与不锈钢焊接管有什么不同吗？

发布人：http://www.sftfgd.com   发布时间：2018-08-02 10:33:17

在大型建筑中，为了达到好的通风效果，通常会采取一些通风措施，通常还会加设一些通风管道，来实现通风换气的功能，而达到这一目的，我们是通过螺旋风管来实现的，因此螺旋风管得到了很广泛的应用。
In large buildings, in order to achieve good ventilation, some ventilation measures are usually adopted, and some ventilation pipes are usually added to achieve the function of ventilation and ventilation. And this is achieved through a spiral wind pipe. Therefore, the spiral wind pipe is widely used.

虽然螺旋风管具有很多优点，但是，它大多数情况下是暴露于室外，因此会受到风吹雨淋，以及日晒，这些因素会侵蚀或者腐蚀螺旋风管，因此要求它具有防腐性能，由此而产生的产品有镀锌螺旋风管、不锈钢螺旋风管以及复合螺旋风管，这三种风管具有耐腐蚀性。
Although the spiral duct has many advantages, it is exposed to the outside most of the time, so it will be exposed to wind, rain, and sun. These factors will eroding or corroding the spiral pipe, so it is required to have anticorrosion properties. These three kinds of air ducts have corrosion resistance.
螺旋风管的作用，除了上面讲到的通风换气外，还可以进行排气，或者用来输送一些泡沫塑料等轻质材料。
The function of spiral duct, in addition to the above mentioned ventilation, can also be exhausted, or used to transport some light materials such as foam plastics.
对于不锈钢焊接管，则又是另一领域，下面来谈谈这方面。
For stainless steel welded pipe, it is another field. Let's talk about this.
不锈钢焊接管在进行组装时，可以通过焊接来完成，这种方法的成本较低，且可调性和适应性高，所以很多人都在使用。
Stainless steel welded pipes can be done by welding when they are assembled. The cost of this method is low, and the adjustability and adaptability are high, so many people are using it.
不锈钢焊接管的焊接技术，也不是现在才出现的，在公元三千多年前出现了，只是现在更加成熟和完善。它的焊接，是通过加热或者加压，或者两种同时使用，焊合接缝，从而组装在一起。能实现不锈钢中原子间的结合，实现性连接。在焊接过程中，一般会用到焊丝，岁焊丝的要求是要与不锈钢的成分保持一致，这样能够保证整体一致性，焊剂则使用氧化性较小的熔炼型或烧结型焊剂，以免损坏合金元素。
Welding technology for stainless steel welded pipes did not appear just now. It appeared more than 3000 years ago, but now it is more mature and perfect. Its welding is assembled by heating or pressing, or two simultaneous use, welding seam. It can realize the combination of atoms in stainless steel and realize sexual connection. In the welding process, the welding wire is usually used. The requirement of the age welding wire is to keep the same with the composition of the stainless steel so that the overall consistency can be ensured. The flux is used to avoid the damage of the alloy elements by the use of the less oxidizing or sintered flux.
以上就是关于不锈钢螺旋风管的介绍，想要了解更多，可以浏览我们的网站，在望着那种有更多知识的介绍，希望对您有帮助！
The above is about the stainless steel spiral wind pipe introduction, want to know more, can browse our website, looking at the kind of professional knowledge of the introduction, I hope to help you!