通风管道安装时需要注意的事项！

发布人：http://www.sftfgd.com   发布时间：2018-11-27 10:49:59

通风管道我们应该并不生疏，可以很好的确保空气流畅，降低有害浓度，铁质通风管道设备主要是有风管出产设备厂家出产完成的，一般来说用于电子厂房的通风，酒店宾馆，还有食物无菌车间等需要进行空气跟新的地方的空调体系。

Ventilation pipes should not be sparse, which can ensure the smooth air flow and reduce harmful concentration. Iron ventilation pipes are mainly manufactured by wind pipe manufacturers. Generally speaking, they are used in ventilation of electronic factories, hotels, and food aseptic workshops, which need air to keep pace with new places. Central air-conditioning system.

关于通风管道体系的装置有很多的要求，下面就来简单的说一说吧。

There are many requirements for the installation of ventilation duct system. Let's talk about it briefly.

在装置的时分要关于风管的方位，高度，走向都要进行设计好，在风管的直径上面要求可以确保关于空气的更新的速度。

Firstly, the orientation, height and direction of the air duct should be well designed when installing the device. The speed of air renewal can be ensured by the requirement of the diameter of the air duct.

关于风管的衔接部分，要进行紧密衔接，中心所选用的垫片的厚度应该不小于3mm,垫片不该凸入管内，亦不宜突出法兰外。关于金属性的风管在转弯的时分要遵从严厉的装置要求。关于塑料软管在弯道时要注意不该该有死弯或许陷落。

As for the connecting part of the air duct, the thickness of the gasket selected by the center should not be less than 3mm, and the gasket should not protrude into the pipe or out of the flange. The metal duct should comply with strict device requirements when turning. As for the plastic hose in the bend, we should pay attention to whether there should be dead bend or collapse.

风管装置前，应内、外杂物，并做好清洁和保护作业。一起关于风管的衔接部分的螺丝的方位要尽可能的便利今后的维修。

Before air duct installation, internal and external debris should be removed, and cleaning and protection work should be done well. Together, the orientation of the screw on the connecting part of the air duct should be as convenient as possible for future maintenance.

在装置的时分要关于风管的方位，高度，走向都要进行设计好，在风管的直径上面要求可以确保关于空气的更新的速度。

Firstly, the orientation, height and direction of the air duct should be well designed when installing the device. The speed of air renewal can be ensured by the requirement of the diameter of the air duct.

关于风管的衔接部分，要进行紧密衔接，中心所选用的垫片的厚度应该不小于3mm,垫片不该凸入管内，亦不宜突出法兰外。关于金属性的风管在转弯的时分要遵从严厉的装置要求。关于塑料软管在弯道时要注意不该该有死弯或许陷落。

As for the connecting part of the air duct, the thickness of the gasket selected by the center should not be less than 3mm, and the gasket should not protrude into the pipe or out of the flange. The metal duct should comply with strict device requirements when turning. As for the plastic hose in the bend, we should pay attention to whether there should be dead bend or collapse.

风管装置前，应内、外杂物，并做好清洁和保护作业。一起关于风管的衔接部分的螺丝的方位要尽可能的便利今后的维修。

Before air duct installation, internal and external debris should be removed, and cleaning and protection work should be done well. Together, the orientation of the screw on the connecting part of the air duct should be as convenient as possible for future maintenance.