无机玻璃钢通风管道的优点是什么？

发布人：http://www.sftfgd.com   发布时间：2019-01-03 11:32:32

1、轻质高强：无机玻璃钢通风管道的密度为钢材的1/4，强度和手糊聚酯玻璃钢强度近似，能够满意各类通风管的强度和刚度设计要求。

1. Light weight and high strength: The density of the inorganic FRP ventilation duct is 1/4 of that of the steel. The strength of the inorganic FRP ventilation duct is similar to that of the hand-pasted polyester FRP, which can satisfy the design requirements of the strength and stiffness of all kinds of ventilation ducts.

2、耐水、防腐：无机玻璃钢通风管道耐水性好，软化系数可达0.8～0.9，，不生锈，运用寿命长。镀锌铁皮风管运用3～5年后会锈蚀，无机玻璃钢通风管道的运用寿命比镀锌铁皮长3倍以上。

2. Water resistance and anticorrosion: Inorganic FRP ventilation pipe has good water resistance, softening coefficient can reach 0.8-0.9, no rust, long service life. Galvanized iron sheet air duct will rust after 3 to 5 years of operation. The service life of inorganic FRP ventilation duct is more than 3 times longer than galvanized iron sheet.

3、耐热、防火性能好：无机玻璃钢通风管道的耐热性能好，能在300℃温度条件下运用。其防火性能更佳，经防火建材质量检测中心检验，无机玻璃钢通风管道属A级否则资料。因此，无机玻璃钢通风管道的耐热性和防火性能均优于聚酯玻璃钢管。

3. Good heat resistance and fire resistance: Inorganic FRP ventilation pipe has good heat resistance and can be used at 300 C. Its fireproof performance is better. Inspected by National Fireproof Building Material Quality Inspection Center, the inorganic FRP ventilation pipeline belongs to Class A or other information. Therefore, the heat resistance and fire resistance of inorganic FRP ventilation pipes are better than that of polyester FRP pipes.

4、成型便利：无机玻璃钢通风管道能够手糊成型，也可机械化出产出板材后再裁切粘接成型。出产过程无有害气体排出，不污染环境，不影响工人健康。

4. Forming convenience: Inorganic FRP ventilation pipe can be hand pasted, or can be mechanized to produce sheet material, then cut and bond. There is no harmful gas discharged during the production process, no pollution to the environment, and no impact on workers'health.

5、装置便利：无机玻璃钢通风管道分为保温夹层结构管和不保温单层结构管两种。夹层保温管可一次在工厂造好，现场只需定位装置就可，不像镀锌铁皮风管那样，风管装置后，还要再在铁皮外包覆保温层，添加现场施工难度，延伸工期。

5. Convenient installation: Inorganic FRP ventilation pipe is divided into insulation sandwich structure pipe and non-insulation single-layer structure pipe. Sandwich insulation pipe can be built in a factory at one time, only need positioning device on site, unlike galvanized iron duct, after the air duct device, it is also coated with insulation layer on the iron sheet, adding the difficulty of field construction and extending the construction period.

无机玻璃钢通风管道还能够在施工现场先拼接2～3节管，使其成一全体较长管，一次吊装，省时省工。

The inorganic FRP ventilation pipeline can also be joined together with 2 to 3 pipes at the construction site to form a whole long pipe, which can be hoisted once and saves time and labor.

6、原资料资源丰富：无机玻璃钢通风管道的原资料资源丰富，氧化镁的产量和储量居世界首位。氯化镁不仅可确保长期供应，而且便宜。

6. Rich raw material resources: Inorganic FRP ventilation pipelines are rich in raw material resources, and the production and reserves of magnesium oxide rank first in the world. Magnesium chloride not only ensures long-term supply, but also is cheap.

7、本钱低、便宜：无机玻璃钢通风管道的本钱低于聚酯玻璃钢风管和镀锌铁皮风管，性能好，便宜，既能下降工程造价，又能给出产风管的厂家带来丰盛的赢利。

7. Low cost and low price: The cost of inorganic FRP ventilation duct is lower than that of polyester FRP duct and galvanized iron sheet duct. It has good performance and low price. It can not only reduce the cost of construction, but also bring lucrative profits to the manufacturer of ventilation duct.

以上信息是我们济南通风管道整理发布的信息，想要了解更多本行业的相关资讯请持续关注着我们的网站：http://www.sftfgd.com。

The above information is published by Jinan Ventilation Pipeline Organization. If you want to know more about this industry, please continue to pay attention to our website: http://www.sftfgd.com.