不锈钢风管的优势你知道是什么吗?

发布人：http://www.sftfgd.com   发布时间：2019-01-22 13:35:53

不锈钢风管这两年在我国，可以说是风行全球，该市场近两年暴升火爆，很多装有空调的场所都可以见到不锈钢风管的影子，那么接下来小编要给我们介绍的就是不锈钢风管在装置施工时需要注意哪些问题和它的一些作业条件，下面一起跟小编来了解下。

Stainless steel ducts have been popular all over the world in China in the past two years. The market has been booming in the past two years. Stainless steel ducts can be seen in many places equipped with central air conditioning. What problems should be paid attention to when installing stainless steel ducts and some operating conditions should be introduced to us in the next edition.

一、不锈钢风管施工注意事项

Notes for Stainless Steel Ventilation Pipe Construction

1：一般的排风机体系和空调体系的装置，都要在建筑物围护结构施工完、障碍物已整理、地上无杂物的状况下下才干进行施工。

1: The general exhaust fan system and air conditioning system should be constructed after the construction of the building envelope, the obstacles have been sorted out, and there is no debris on the ground.

2：对于空气洁净体系的装置，应该在建筑物内部装置部件的地上做好，墙面已抹灰结束，室内无灰尘飞扬或有防尘办法的条件下进行施工。

2: For the air cleaning system, the installation should be completed on the ground of the internal parts of the building, the wall has been plastered, the indoor dust-free flying or dustproof methods.

3：一般除尘不锈钢风管建议装置宜厂房的工艺设备上，装置完或设备基础己确定后，设备连接器、罩体方位已知的状况下进行施工。

3: The general dust removal stainless steel air duct recommendation device should be on the process equipment of the factory building. After the installation is completed or the equipment foundation has been determined, the construction should be carried out under the condition that the position of the equipment connector and cover body is known.

4：查看现场预留不锈钢风管孔洞方位、尺寸，要求与施工图纸保持一致，每个边要比实践截面大100mm。

4: Look at the orientation and size of the reserved stainless steel air duct holes on site, and the requirements are consistent with the construction drawings. Each side is 100 mm larger than the practical section.

5：不锈钢风管作业地址要一定有相应的辅佐设施，如梯子、架子、防护、消防器材，并有施工员的技术、质量、交底。

5: The working address of stainless steel air duct must have corresponding auxiliary facilities, such as ladders, shelves, safety protection, fire fighting equipment, and the technical, quality and safety of the builders.

二、不锈钢风管装置资料条件

II. Data Conditions of Stainless Steel Air Pipe Devices

1：各类板材、管材等都要有质量证明系列文件和产品清单。

1: All kinds of sheets and pipes should have quality certification series documents and product lists.

2：风管成品不允许有变形、歪曲、开裂、孔洞、法兰脱落、开焊、漏铆、漏打螺栓孔等一系列缺陷状况出现。

2: Deformation, distortion, cracking, holes, flange shedding, welding, riveting and bolt holes are not allowed in the finished duct.

3：通风管道工程装置的阀体消声器、罩体、风口等部件应查看调理装置是否灵敏，消声片、油漆层有无损害。

3: The valve body muffler, hood, tuyere and other components of ventilation pipeline engineering device should check whether the conditioning device is sensitive, and whether the muffler and paint layer are harmful.

4：装置运用的资料：螺栓、螺母、垫圈、垫料、密封条、自攻螺钉、拉铆钉、电焊条、各种帆布、无纺布、膨胀螺栓等都要契合产品质量的要求。

4: The materials used in the device: bolts, nuts, washers, gaskets, seals, tapping screws, rivets, welding rods, various canvas, non-woven fabrics, expansion bolts, etc. should meet the requirements of product quality.

以上信息是我们山东通风管道整理发布希望对大家有所帮助我们的网站是：http://www.sftfgd.com/!

The above information is our Shandong ventilation duct arrangement and release hope to help you with our website is: http://www.sftfgd.com/!