当前位置:首页-新闻中心新闻中心

螺旋风管的优势性是什么样的你知道吗?

发布人:http://www.sftfgd.com   发布时间:2019-02-26 09:56:10

螺旋风管的设备明显地减少了管与管之间的联接点,使管件结合部的透露减少到较低水平,典型的螺旋风管长度是三到六米,而典型的矩形风管的长度只需一到一点五米;且联接两个螺旋风管只需一个管接件,而传统的矩形风管的联接则常常必要一个完好自力的双法兰系统。

The equipment of spiral duct obviously reduces the connection point between pipe and pipe, and reduces the disclosure of joint parts to the lowest level. The typical length of spiral duct is 3-6 meters, while the typical length of rectangular duct is only 1-1.5 meters; and the connection of two spiral ducts only needs one pipe joint, while the traditional connection of rectangular duct often needs a perfect self-supporting double. Flange system.

1、标准化产品。

1. Standardized products.

螺旋圆风管的配件(管件和评论)的分娩已高度自动化、系统化,并具有工业化的质量节制。

The delivery of fittings (fittings and comments) of spiral circular air duct has been highly automated and systematic, and has industrialized quality control.

2、设备费用低。

2. Low equipment cost.

圆形风管系统的设备岁月只需相类似的矩形管道的三分之一。

Circular duct systems require only a third of the equipment years of similar rectangular ducts.

3、素日只需较小的设备空间。

3. Small equipment space is needed in vegetable days.

在不增加任何压降的情况下,相同的设备空间内直径为二百毫米的圆形管道可替代二百五到一百五毫米的矩形管道。在不增加额定设备空间的前提下,数条平行的圆形管道可替代扁平矩形管道。

Without any additional pressure drop, a circular pipe with a diameter of 200 mm in the same equipment space can replace a rectangular pipe with a diameter of 25 to 15 mm. Without increasing the rated equipment space, several parallel circular pipes can replace flat rectangular pipes.

酌量了所有的身分,在绝大多数情况下,圆形管道所占用的空间都要少于矩形管道。对反常的压力特征,数条圆形管道的设备空间常常与一条矩形管道的的设备空间相同或更少。许多矩形管道系统设备时必要四螺栓系统,因而在管道的各个偏向增加四十到八十毫米。

Considering all identities, in most cases, circular pipes occupy less space than rectangular pipes. For abnormal pressure characteristics, the equipment space of several circular pipes is often the same or less as that of a rectangular pipe. Many rectangular piping systems require a four-bolt system for equipment, thus increasing the deviation of the piping by 40 to 80 mm.

20170426044854120.jpg

4.平安密封圈防漏系统。

4. Safety sealing ring leak-proof system.

5.压低落:众所周知,圆形风管的风阻比矩形风管的风阻要小得多。

5. Depression: It is well known that the wind resistance of a circular duct is much smaller than that of a rectangular duct.

6.相同截面积时,长宽比为一比三的矩形风管周长比螺旋风管的周长百分之四十,用材省;同理而言,由于螺旋风管周对错,保温用材也可呼应减少。

6. With the same cross-section area, the circumference of rectangular duct with the ratio of length to width of one to three is 40% longer than that of spiral duct, which saves material consumption. Similarly, because of the right and wrong circumference of spiral duct, the insulation material can also be reduced.

7.精巧的螺旋压抑楞筋工艺使螺旋风管具有蒙受压力的较好强度,增加螺旋型楞筋后,咬口潜缝厚度是管体的四倍,管道的刚性反常大,显示出结实的优越性,能蒙受较大的压力负荷而无损变形,用材厚度可减小百分之十五,低落本钱。

7. Exquisite spiral restraining rib technology makes the spiral air duct have the best strength under pressure. After increasing the spiral rib, the thickness of the undercut in the bite is four times that of the tube body, and the rigidity of the pipe is abnormal, showing strong superiority. It can withstand the greatest pressure load without damaging the deformation. The thickness of the material can be reduced by 15% and the cost can be reduced.

以上信息是我们济南通风管道整理发布希望对大家有所帮助我们的网站是:http://www.sftfgd.com

The above information is our Jinan ventilation duct arrangement and release hope to help you all on our website is: http://www.sftfgd.com!


上一篇:镀锌通风管道给我们带来什么方便?
下一篇:螺旋风管设计时要注意哪些问题?

网站首页 关于我们 产品展示 新闻中心 工程案例 在线留言 联系我们