排烟管道应该怎么安装？

发布人：http://www.sftfgd.com   发布时间：2019-02-28 10:32:31

排烟管道的装置有利于室内空气的流转，并且能够有效的下降有毒气体的浓度，下面就为我们介绍一下排烟管道装置的一些注意事项。

The device of smoke exhaust pipe is conducive to the flow of indoor air, and can effectively reduce the concentration of toxic gases. Here we introduce some points for attention of smoke exhaust pipe device.

处理各种排烟管道相碰及调和的原则，一般为：“小管让大管，有压让无压”。例如，自来水管与风管相撞，则应当自来水管拐弯。冷、热水管与下水管相碰，则应改变冷、热水管道，排烟管道是为了使空气流转，下降有害气体浓度的一种市政基础设施。

The principle of dealing with the collision and harmonization of various smoke exhaust pipes is generally as follows: "Small pipe let big pipe, pressure let no pressure". For example, when a water pipe collides with an air pipe, the water pipe should turn. When the cold and hot water pipes collide with the sewer pipes, the cold and hot water pipes should be changed. The smoke exhaust pipe is a municipal infrastructure to make the air flow and reduce the concentration of harmful gases.

排烟管道装置装置所用板材、型材以及其他首要制品材料应契合规划及有关商品现行规范的规矩，并运用出厂查验合格证明，材料出场时应按现行有关规范进行查验。

Material used in flue gas exhaust pipe installations shall conform to the regulations of the planning and the current national standards for related commodities, and shall be inspected according to the relevant national standards when the materials appear on the scene using the certificate of qualifications for factory inspection.

排烟管道工程开端之前，应该将各工种的管线，单线画在一张平面图上。每种管道用一种彩色笔。在各交点处概括其标高，看是不是有矛盾之处，及时发现，将问题处理在装置之前。

Before the beginning of the flue gas pipeline project, the pipelines of various types of work should be drawn on a single plane map. Each pipe uses a colour pen. Summarize the elevation at each intersection to see if there is any contradiction, find out in time, and deal with the problem before the device.

在热处理车间，排烟管道装置需求按照车间装置工艺图纸进行装置，然后根据实际需求进行调整，如果还不能保持室内温度安稳，需求对车间温度装置调整器，一般的车间会以空调替代，所以我们也要为空调加装通风设备，这些装置的通风系统都是必不可少的。

In heat treatment workshop, the requirement of smoke exhaust pipe device is adjusted according to the process drawings of workshop device, and then according to the actual requirement. If the indoor temperature can not be kept stable, the requirement of workshop temperature device regulator will be replaced by air conditioning in general workshop, so we also need to install ventilation equipment for air conditioning. The ventilation system of these devices is indispensable.

通风管道装置好以后需求考虑的因素就是耐腐蚀，由于大多数的热处理车间都是在较高温度下作业的，有时需求用水进行冷却，这就会造成大量的水蒸气蒸腾，这些气体中都含有腐蚀性物质，所以管道一定要耐腐蚀。

After the installation of ventilation pipeline, the need to consider the factor is corrosion resistance, because most heat treatment workshops are operating at higher temperatures, and sometimes need water for cooling, which will cause a lot of steam transpiration, these gases contain corrosive substances, so the pipeline must be corrosion-resistant.

以上信息是我们山东通风管道整理发布希望对于大家有所帮助我们的网站是：http://www.sftfgd.com！

The above information is our Shandong ventilation duct arrangement and release hope to help you with our website is: http://www.sftfgd.com!