当前位置:首页-新闻中心新闻中心

通风管道能给我们生活中带来些什么方便?

发布人:http://www.sftfgd.com   发布时间:2019-03-05 09:27:58

如今,通风管道运用范围越来越广,这都是什么原因呢?

Nowadays, ventilation pipes are used more and more widely. What is the reason?

现在咱们公司的通风管道包含了不锈钢,镀锌风管,机制风管,风管是现在空调工程、通风排烟系统、净化工程中遍及运用的产品。镀锌风管内壁润滑、阻力小、通风损耗小、降低能耗,节省运转费用,气密性及密闭性好、承压抗压强度高。

Now our company's ventilation ducts include stainless steel, galvanized ducts, machine-made ducts, ducts are now widely used in air conditioning engineering, ventilation and smoke exhaust system, purification engineering products. The inner wall of galvanized duct has the advantages of lubrication, low resistance, low ventilation loss, low energy consumption, saving operation cost, good airtightness and airtightness, and high compressive strength.

一起杰出的防火功能也是通风管道中运用广泛的原因之一。镀锌风管安装简略,现场制做便利,与土建工程配合紧密,能合适非常复杂的净化通风工程。产品多用于大型、写字楼、地铁站、大型、现代化工厂的消防排烟、空调通风、排尘通风等。

An outstanding fire protection function is also one of the reasons why ventilation pipes are widely used. Galvanized air duct is simple to install, convenient to make on site, closely cooperated with civil engineering, and suitable for very complex purification and ventilation projects. Products are mostly used in large shopping malls, office buildings, subway stations, supermarkets, modern factories, such as fire and smoke exhaust, air conditioning and ventilation, dust exhaust and ventilation.

通风管道按用途分可分为:净化系统送回风管、空调通风管、工业送排风通风管、系统吸排风管、矿用抽放瓦斯管、矿用涂胶布风筒等;消防排烟管道工程。

Ventilation pipes can be divided into: air supply and return pipes of purification system, air supply and exhaust pipes of central air conditioning, industrial air supply and exhaust pipes, air suction and exhaust pipes of environmental protection system, mine gas drainage pipes, mine coated air ducts, etc. and fire fighting and smoke exhaust pipes.

20170426044854120.jpg

1 对于比较复杂的民用建筑,在设计阶段,各工种(暖通、给水排水,供电照明与建筑)应协商好空间分隔,定出每种管道的标高范围。一般情况下不得越出给自己规定的界限。遇有个别管段要越界时应与通风管道其他工程协商。

For more complex civil buildings, in the design stage, each type of work (HVAC, water supply and drainage, power supply and lighting and architecture) should first negotiate the space separation and determine the elevation range of each kind of pipeline. Normally, it is not allowed to go beyond the limits set for itself. In case of individual pipeline sections crossing the boundary, they should consult with other ventilation pipeline projects.

2 解决各种通风管道相碰及协调的原则,一般为:“小管让大管,有压让无压”。例如,自来水管与风管相撞,则应当自来水管拐弯。冷、热水管与下水管相碰,则应改变冷、热水管道。

2. The principle of solving the collision and coordination of various ventilation pipes is generally as follows: "Small pipes let big pipes, pressure let no pressure". For example, when a water pipe collides with an air pipe, the water pipe should turn. When the cold and hot water pipes collide with the sewer pipes, the cold and hot water pipes should be changed.

3 施工前应设备总管的工程师,将各工种的管线,单线画在一张平面图上。每种管道用一种彩色笔。在各交点处综合其标高,看是否有矛盾之处,及时发现,将问题解决在安装之前。

Before the construction, the Engineer in charge of the equipment shall draw the pipelines of each type of work on a single plan. Each pipe uses a colour pen. Integrate the elevation at each intersection to see if there are any contradictions, find out in time, and solve the problem before installation.

4 为了减少投资,节省空间,降低层高,有些敷设无坡度要求的管道,可以穿梁敷设(如自来水管道,消防喷洒干管等)。

4 In order to reduce investment, save space and reduce floor height, some pipes without gradient requirements can be laid through beams (such as tap water pipes, fire spraying trunk pipes, etc.).

以上信息是我们山东通风管道整理发布希望对大家有所帮助我们的网站是:http://www.sftfgd.com

The above information is our Shandong ventilation duct arrangement and release hope to help you with our website is: http://www.sftfgd.com!


上一篇:制作通风管道的材料是什么?
下一篇:镀锌风管安装注意事项!

网站首页 关于我们 产品展示 新闻中心 工程案例 在线留言 联系我们