当前位置:首页-新闻中心新闻中心

装置通风管道​如何合理布局呢?

发布人:http://www.sftfgd.com   发布时间:2020-02-19 19:49:07

随着市场的快速发展,对风管的需求量越来越大。在各行各业,它已经成为人们生活中不可缺少的一部分。通风管道系统布置平整美观,简单紧凑,便于安装、操作和维护等。通风管道安装系统布局的一般步骤是什么?我应该注意什么?
  With the rapid development of the market, the demand for air ducts is increasing. In all walks of life, it has become an indispensable part of people's life. The layout of ventilation duct system is flat and beautiful, simple and compact, easy to install, operate and maintain. What are the general steps in the layout of the ventilation duct installation system? What should I pay attention to?
  通风管道处理的系统布置应遵循以下几点:
  The system layout of ventilation pipe treatment shall follow the following points:
  为了便于管网的管理和运行调节,管网系统不宜过大。当同一系统中有多个支管时,应对这些支管进行分级控制,同一系统的吸力点不宜过多,并注意各支管的压力平衡。常用的管网布置形式有干管布置、单管布置和环管布置。
  In order to facilitate the management and operation of the pipe network, the pipe network system should not be too large. When there are more than one branch pipes in the same system, the branch pipes shall be controlled in different levels. The suction points of the same system shall not be too many, and the pressure balance of each branch pipe shall be paid attention to. The common pipe network layout forms are main pipe layout, single pipe layout and ring pipe layout.
  二是布局原则
  Second, layout principle
  1. 通风管道敷设系统原理
  1. Principle of ventilation pipe laying system
  管道铺设清晰、深色,一般采用平直。因为安装简单,易于维护,当使用纯安装可以不考虑黑暗的安装,管道尽可能为一行,尽可能沿墙或列平行铺设,如果管径或绝缘应安排在墙上。两根管道平行敷设时,间距一般不小于100 ~ 200mm。
  The pipeline laying shall be clear and dark, and generally straight. Because the installation is simple and easy to maintain, when using the pure installation, the dark installation may not be considered. The pipeline shall be laid in one line as far as possible and parallel along the wall or column as far as possible. If the pipe diameter or insulation is arranged on the wall. When two pipes are laid in parallel, the spacing is generally not less than 100 ~ 200mm.

20170427120429686.jpg


  2. 通风管道处理系统的连接原理
  2. Connection principle of ventilation pipe processing system
  以焊接为主要连接方式的管道应设置足够数量的法兰连接,螺纹连接管道应设置足够的活动接头,便于安装、拆卸和检修。
  Enough flange connection shall be set for pipes with welding as the main connection mode, and enough movable joints shall be set for threaded pipes to facilitate installation, disassembly and maintenance.
  3.通风管道安装处理系统的支撑原理不能由管道和阀门直接支撑在设备上。支架或吊架应单独设置。
  3. The supporting principle of the installation and treatment system of the ventilation pipe cannot be directly supported on the equipment by the pipe and valve. Supports or hangers shall be set separately.
  4. 不同含尘气体具有不同的性质,因此净化的分段处理应有所不同。
  4. Different dust-containing gases have different properties, so the treatment of purification in sections should be different.
  当污染源数量较大时,可以集中在一个净化系统中,也可以分为多个净化系统。然而,当污染物与气体混合后,可能会引起燃烧、爆炸危险、不同的温度和湿度、冷凝、粉尘或气体的性质在管道中混合后,可能会影响回收或净化效率。
  When the number of pollution sources is large, they can be concentrated in one purification system or divided into multiple purification systems. However, when the pollutants are mixed with the gas, it may cause combustion, explosion hazard, different temperature and humidity, condensation, dust or gas properties mixed in the pipeline, which may affect the recovery or purification efficiency.
  5、通风管道处理系统布置要保证整个系统的泄漏量很小,要保证吸入口有足够的风量。
  5. The layout of the ventilation pipeline treatment system shall ensure that the leakage of the whole system is very small and that the suction port has enough air volume.
  6、通风管道处理系统布置,减少阻力。
  6. Arrangement of ventilation pipe treatment system to reduce resistance.
  以上就是山东通风管道对通风管道如何合理布局的详细介绍,想要了解更多请点击官网http://www.sftfgd.com
  The above is a detailed introduction of how to arrange the ventilation pipes in Shandong Province. For more information, please click http://www.sftfgd.com

上一篇:黑白铁加工控制噪音的措施都有哪些?
下一篇:对通风管道杂质清理的方式都有哪些?​

网站首页 关于我们 产品展示 新闻中心 工程案例 在线留言 联系我们