通风管道维护加工应做到7点！

发布人：http://www.sftfgd.com   发布时间：2021-03-01 14:31:38

随着人们的生活越来越好，关于生活坏境以及工作环境的恳求也是越来越高，建筑内部都会安装通风管道，运用通风管道加工应留意维护保养。通风管道对我们的生活已经非常重要，把通风管道的维护做好了，这样才能保证使用时的性，更好的运行。

With people's life getting better and better, the appeal about the living environment and working environment is also getting higher and higher. Ventilation pipes will be installed inside buildings, and the use of ventilation pipe processing should pay attention to maintenance. The ventilation pipe is very important to our life, the maintenance of the ventilation pipe is done well, so as to ensure the safety of use and better operation.

1、运转操作需严厉执行操作规程，控制工艺指标，根绝超温、超压运转；

1. The operation should strictly follow the operation rules, control the process indexes, and eliminate the over temperature and over pressure operation;

2、检修或局部改换通风管道时，避免错用或不合理代用而降低管道的极 限应力；

2. When the ventilation pipe is repaired or partially replaced, it should be avoided to reduce the limit stress of the pipe due to misuse or unreasonable substitution;

3、通风管道系统应按规则装设安.全泄压装置并坚持其灵敏好用；

3. The ventilation pipe system should be equipped with safety relief device according to the rules, and it should be sensitive and easy to use;

4、通风管道加工需由有资历的设计单位中止设计并契合设计规范的规则；

4. The ventilation duct processing should be stopped by qualified design units and conform to the rules of design specifications;

5、采取有效措施防止大气及介质对通风管道的腐蚀；

5. Effective measures should be taken to prevent the corrosion of air and medium to ventilation pipes;

6、通风管道安装工程投用前应中止役前检查和验收，管系结构、材料、焊接、热处置、压力实验等关键环节需契合规则恳求；

6. The pre service inspection and acceptance should be suspended before the ventilation pipe installation project is put into use, and the key links such as pipe structure, material, welding, heat treatment and pressure test should conform to the rules;

7、对长期放置不用、维护不良的通风管道，因发作大面积腐蚀、厚度减薄、强度削弱，再次启用前按规则全.面检验。

7. Due to large area corrosion, thickness thinning and strength weakening of ventilation pipes which are not used for a long time and are poorly maintained, full face inspection shall be carried out according to the rules before they are put into use again.

以上就是日常维护通风管道加工应做到这7点的介绍，希望上面的内容对大家有所帮助，大家如果想要了解更多这方面的资讯，欢迎随时联系山东通风管道http://www.sftfgd.com 。

The above is the daily maintenance of ventilation pipe processing should do these 7 points, I hope the above content to help you, if you want to know more about this information, please feel free to contact Shandong ventilation pipe http://www.sftfgd.com  .