不锈钢风管的连接方式有哪几种？

发布人：http://www.sftfgd.com   发布时间：2022-03-09 15:26:17

不锈钢风管，是用于空气输送和分布的管道系统。有复合风管和无机风管两种。风管可按截面形状和材质分类。风管制作不锈钢风管制作是在咬口缝、铆钉缝、法兰翻边四

Stainless steel air duct is a pipe system used for air transmission and distribution. There are two kinds of composite air duct and inorganic air duct. Ducts can be classified by section shape and material. The production of air duct stainless steel air duct is made in bite seam, rivet seam and flange flanging

角等缝隙处涂上密封胶（如中性玻璃胶）。涂密封胶前应清理干净表面尘土和油污。按截面形状，风管可分为圆形风管，矩形风管，扁圆风管等多种，其中圆形风管阻力

Apply sealant (such as neutral glass glue) to the gaps such as corners. Before applying sealant, clean the dust and oil stain on the surface. According to the section shape, the air duct can be divided into circular air duct, rectangular air duct, flat round air duct and so on

应用以矩形风管为主。按材质，风管可分为金属风管，复合风管，高分子风管。

The application is mainly rectangular duct. According to the material, the air duct can be divided into metal air duct, composite air duct and polymer air duct.

不锈钢风管的连接方式有哪些

What are the connection modes of stainless steel air duct

1、抱箍式连接：主要用于钢板圆通风管道和螺旋风管连接，先把每一管段的两端轧出鼓筋，并使其一端缩为小口。安装时按气流方向把小口插大口，外面用钢制抱箍将两个端的鼓箍抱紧连接，用螺栓穿在耳环中间固定拧紧。

1. Hoop type connection: it is mainly used for the connection of steel plate round air duct and spiral air duct. First roll out the bulge reinforcement at both ends of each pipe section and shrink one end into a small opening. During installation, insert the small opening into the large opening according to the direction of air flow, tightly connect the drum hoops at the two ends with steel hoops, and fix and tighten them in the middle of the earrings with bolts.

2、插接式连接：主要用于矩形或圆形风管连接。先制作连接管，然后插入两侧风管，再用拉铆钉将其紧密固定。

2. Plug in connection: mainly used for rectangular or circular air duct connection. First make the connecting pipe, then insert the air ducts on both sides, and then fix it tightly with pull rivets.

不锈钢风管的连接方式

Connection mode of stainless steel air duct

3、插条式连接：主要用于矩形风管连接。将不同形式的插条插入风管两端，然后压实。

3. Plug in connection: mainly used for rectangular air duct connection. Insert the two ends of the air duct in different forms, and then compact the air duct.

4、软管式连接：主要用于风管与部件(如散热器、静压箱侧送风口等)的相连。安装时，软管两端套在连接的管外，然后用特别软卡把软管箍紧。

4. Hose connection: it is mainly used for the connection between air duct and components (such as radiator, plenum side air supply outlet, etc.). During installation, both ends of the hose shall be sleeved outside the connected pipe, and then the hose shall be clamped tightly with a special soft clamp.

以上就是为大家介绍的有关济南铁皮风管加工的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sftfgd.com

The above is a detailed introduction to the processing of Jinan iron sheet air duct. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.sftfgd.com