当前位置:首页-新闻中心新闻中心

通风管道不同环境的安装有什么区别?

发布人:http://www.sftfgd.com   发布时间:2022-04-11 10:06:00

通风管道包括钢板、镀锌板、不锈钢、玻璃钢等材料。安装时需要根据净化空调系统、空调系统、环境控制系统、工业通风系统等进行使用。具体使用环境选用不同的材料。那么通风管道不同环境的安装有什么区别?它要注意这些内容!

Ventilation pipes include steel plate, galvanized sheet, stainless steel, FRP and other materials. During installation, it needs to be used according to purification air conditioning system, air conditioning system, environmental control system, industrial ventilation system, etc. Different materials shall be selected for specific use environment. What is the difference between the installation of ventilation ducts in different environments? It should pay attention to these contents!

QQ截图20170428145447.png

通风管道不同环境的安装有什么区别?

What are the differences in the installation of ventilation ducts in different environments?

1、安装油烟通风管道

1. Install oil fume ventilation duct

安装抽油烟机的通风管道,设以标准为准,一定要有厂家的合格证和检验证。通常通风管的尺寸在2000*450左右,是比较大的通风管。

When installing the ventilation duct of the range hood, the design shall be subject to the national standard, and the manufacturer's certificate and inspection certificate must be provided. Generally, the size of the ventilation pipe is about 2000 * 450, which is a relatively large ventilation pipe.

2、安装浴霸通风管道

2. Install Yuba ventilation duct

浴霸通风管道的尺寸需要300*300mm或300*600,直径在100到150之间。通风管道的尺寸应根据家庭面积选择合适尺寸的通风管道。通风管道规格小于40cm的,吊架距离不大于4m。通风管道规格大于40cm的,吊架距离不大于3m。

The size of Yuba ventilation duct needs to be 300 * 300mm or 300 * 600, and the diameter is between 100 and 150. The size of ventilation duct shall be selected according to the family area. If the size of ventilation pipe is less than 40cm, the hanger distance shall not be greater than 4m. If the size of ventilation pipe is greater than 40cm, the hanger distance shall not be greater than 3m.

3、安装新风系统通风管

3. Install the ventilation pipe of fresh air system

新风系统主机。金属风管应保温。减震器应安装在吊杆上;新风输出口、排气输出口和主机之间的连接应安装消声器或软连接。

Fresh air system host. Metal air ducts shall be insulated. The shock absorber shall be installed on the suspender; Muffler or soft connection shall be installed for the connection between fresh air outlet, exhaust outlet and main engine.

通风管道安装要注意这些内容:

Pay attention to these contents during the installation of ventilation duct:

1、通风管道安装前的准备工作也非常重要,确保管道内外表面清洁,检查其平整度和水平度,检查现场结构预留孔的位置、尺寸、标高,擦拭风管内外。

1. The preparation work before the installation of the ventilation duct is also very important. Ensure that the internal and external surfaces of the duct are clean, check their flatness and levelness, check the position, size and elevation of the reserved holes of the site structure, and wipe the inside and outside of the duct.

2、安装风管时还应注意:管道及配件的可拆卸接口不得安装在墙壁和走道地板上;支架、吊架、托架的预埋件不得涂漆、支架、吊架、托架不得设置在风口、阀门、检查门外。吊架不得直接挂在法兰上。防火阀、电动风阀等部件应单独设置吊架。

2. When installing the air duct, it should also be noted that the removable interface of the pipeline and accessories shall not be installed on the wall and walkway floor; The embedded parts of supports, hangers and brackets shall not be painted, and the supports, hangers and brackets shall not be set outside the air vents, valves and inspection doors. The hanger shall not be hung directly on the flange. Fire damper, electric air valve and other components shall be separately provided with hangers.

以上就是为大家介绍的有关济南风管加工厂的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sftfgd.com

The above is the detailed introduction of Jinan air duct processing factory. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.sftfgd.com


上一篇:通风管道及时进行清洗有哪些好处?
下一篇:通风管道厂家安装过程中振动和噪音的预防

网站首页 关于我们 产品展示 新闻中心 工程案例 在线留言 联系我们