当前位置:首页-新闻中心 > 新闻中心

通风管道加工系统布局要减小阻力

发布人:http://www.sftfgd.com   发布时间:2022-05-09 20:34:43

通风管道自问世以来,就以非常迅猛的姿态一下子席卷整个市场。这不仅因为其自身功能的突出特点,也因为其低廉的价格非常适合推广并普及,因而非常受到诸多厂家的欢迎。下面济南通风管道加工厂家为大家介绍就是通风管道质量判断的四大标准,

Since its inception, the ventilation duct has swept the whole market with a very rapid attitude. This is not only because of the outstanding characteristics of its own functions, but also because its low price is very suitable for promotion and popularization, so it is very popular with many manufacturers. Next, Jinan ventilation pipe processing factory will introduce the four standards for judging the quality of ventilation pipes,

通风设备我们都很熟悉,通风管道是连接风机、空气处理设备和进风口的管道,是通风设备的重要组成部分。设计通风管道时,应注意通风管道中的阻力,设应尽可能减小阻力。.设计通风管道时,弯头应尽可能少,两个弯头之间的距离应较大。当两弯头之间的距离为管径的3倍时,阻力增加约80%。如果是5倍,只会增加30%。自通风管道问世以来,由于其自身的特点和低价席卷了整个市场,受到许多制造商的欢迎。在使用中,要学会该学会维护和清洁通风管道,以便更好地发挥自己的作用。实用:这点应该是重要的一点,也是客户们所追求的一点,只有达到了工程的效果,这样客户才能认可我们的产品。

We are all familiar with ventilation equipment. Ventilation pipe is the pipe connecting fan, air handling equipment and air inlet. It is an important part of ventilation equipment. When designing the ventilation duct, pay attention to the resistance in the ventilation duct and reduce the resistance as much as possible When designing the ventilation duct, the elbows shall be as few as possible, and the distance between the two elbows shall be large. When the distance between two elbows is 3 times of the pipe diameter, the resistance increases by about 80%. If it is five times, it will only increase by 30%. Since the air duct came out, it has swept the whole market due to its own characteristics and low price, and has been welcomed by many manufacturers. In use, we should learn how to maintain and clean the ventilation duct, so as to better play our role. Practical: this should be an important point, which is also what customers pursue. Only when the effect of the project is achieved, can customers recognize our products.

20170427487014.jpg

1、通风管道加工系统布局要减小阻力。

1. The layout of ventilation duct processing system shall reduce the resistance.

2、不同含尘气体性质不同,则净化的分段处理应不同,当污染源多时可以集中在一个净化系统中,也可分为几个系统,但出现污染物混合会引起燃烧、爆炸危险、不同温度和湿度的气体,混合后出现管道内结露、粉尘或气体性质不同,影响回收或净化效率的。、

2. If the properties of different dusty gases are different, the segmented treatment of purification should be different. When there are many pollution sources, they can be concentrated in one purification system or divided into several systems. However, the mixing of pollutants will cause combustion, explosion hazards, gases with different temperatures and humidity. After mixing, the condensation, dust or gas properties in the pipeline are different, which will affect the recovery or purification efficiency

3、管道加工系统布局中要保证整体系统的漏损小,确保吸尘口的有足够的风量。

3. In the layout of the pipeline processing system, the leakage of the whole system shall be small, and sufficient air volume at the suction port shall be ensured.

以上就是为大家介绍的有关济南通风管道的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sftfgd.com

The above is the detailed introduction of Jinan ventilation duct. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.sftfgd.com


上一篇:工业环保空调的风管加工有哪些规范和注意事项?
下一篇:最后一页

网站首页 关于我们 产品展示 新闻中心 工程案例 在线留言 联系我们