当前位置:首页-新闻中心 > 新闻中心

通风管道的类型有哪些

发布人:http://www.sftfgd.com   发布时间:2022-11-01 14:21:01

通风管道的类型有很多种,不同的类型与空调进行联合使用,所发挥出来的效果也不一样,尤其是保温性的通风管道。所以说,我们要想进行通风管道加工,且让它们更好的结合空调进行工作,那么,我们也要在加工之前考虑下它们的类型,这是我们确保它们作业,发挥优势作用的好条件。

There are many types of ventilation ducts, and different types of ventilation ducts will have different effects when used together with air conditioners, especially thermal insulation ventilation ducts. Therefore, if we want to process ventilation ducts and make them work better with air conditioners, we should also consider their types before processing, which is a good condition for us to ensure their operation and play a dominant role.

我们预先组装胶粘剂,以验证所有的接头是否符合准确和正确的刷胶。在大规模生产和加工之前,应进行样品试验。

We pre assemble the adhesive to verify that all joints meet the requirements of accurate and correct gluing. Sample test shall be conducted before mass production and processing.

集气(烟)置一般采用整体加工,包括过滤、集油、集水等设备,多为公司制作。其外形应统一、美观、易于清理,厨房通风中,需补充-定数里的新风,一方面可以平衡气压,避免厨房负压过大,另一方面可以降低厨房内的温度,改善工作环境。厨房排烟管道的水平段不宜太长.

Generally, the gas (smoke) collector is processed as a whole, including filtration, oil collection, water collection and other equipment, which are mostly made by the company. Its appearance should be uniform, beautiful and easy to clean. In the kitchen ventilation, fresh air within a certain distance should be added. On the one hand, it can balance the air pressure to avoid excessive negative pressure in the kitchen, on the other hand, it can reduce the temperature in the kitchen and improve the working environment. The horizontal section of the kitchen smoke exhaust pipe should not be too long

QQ截图20170428145417.png

水平远距离不应超过15m并且要有2%以上的坡度,水平末端设活接头,以方便清理由垢。排风速度按规范不得低于10m/s以防风速过低使油着于烟道上,接排风罩的支管应设风里调节阀。就是通风管道的基本规格,我们所需要的通风管道的尺寸和大小。值得我们注意的是,在进行规格确定的时候,我们需要与空调的使用进行联系,只有这样,我们才能够保证通风管道规格设定之后,能够与空调相互连接,并发挥使用功能,完成它们的使用效果。

The horizontal distance shall not exceed 15m and shall have a slope of more than 2%. A movable joint shall be set at the horizontal end to facilitate the cleaning of dirt. The exhaust speed shall not be less than 10m/s according to the specification to prevent oil from burning on the flue due to low wind speed. The branch pipe connected to the exhaust hood shall be equipped with air inlet regulating valve. It is the basic specification of the ventilation pipe, and the size and size of the ventilation pipe we need. It is worth noting that when determining the specifications, we need to contact with the use of air conditioners. Only in this way can we ensure that after the specifications of ventilation ducts are set, they can be connected with the air conditioners, and play a role in their use.

以上就是为大家介绍的有关济南铁皮风管加工的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sftfgd.com

The above is a detailed introduction to the processing of Jinan iron sheet air duct, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.sftfgd.com


上一篇:白铁皮通风管道在生活中的作用
下一篇:通风管道在运输过程应做好哪些防护措施

网站首页 关于我们 产品展示 新闻中心 工程案例 在线留言 联系我们