不锈钢风管的空气流动性好

发布人：http://www.sftfgd.com   发布时间：2023-03-22 19:48:59

不锈钢风管的空气流动性好，有效通流面积大，由于强度大，因此风管振动引起的低频噪声更小，空气流动性能好，系统压降小，日常运行系统耗电量少。目前还可以采用扁椭圆形风管来降低风管的占用空间高度，由于风管的两边是圆形，所以气流稳定，风管的刚性好，外露安装美观性好，是比较好的风管系列。

The stainless steel air duct has good air fluidity and a large effective flow area. Due to its high intensity, the low-frequency noise caused by the vibration of the air duct is smaller, the air flow performance is good, the system pressure drop is small, and the daily operation of the system consumes less power. Currently, flat oval air ducts can also be used to reduce the height of the occupied space of the air duct. Due to the circular shape on both sides of the air duct, the air flow is stable, the rigidity of the air duct is good, and the exposed installation is beautiful. It is a relatively good air duct series.

不锈钢风管的制作是采用带钢带状卷料，通过风管成型机一次咬出咬口骨形，并沿螺旋渐开线轨迹卷成圆形管状，同时将咬口缝压紧，按需要的长度切割而成。自投放市场以来，因其本身具有良好性能及低廉的动作成本，被广泛应用于造船、通风、空调、净化、桥梁除尘、机场、隧道等建筑行业。

The production of stainless steel air duct is made of strip steel strip coil material, which is bitten out of the bite bone shape through the air duct molding machine at one time, and rolled into a circular tube shape along the spiral involute trajectory. At the same time, the bite seam is pressed tightly and cut according to the required length. Since its launch on the market, it has been widely used in shipbuilding, ventilation, air conditioning, purification, bridge dust removal, airports, tunnels and other construction industries due to its excellent performance and low operating costs.

送冷风和热风常见的是空调的管道，这种管道需要加保温材料。也可内贴保温材料，使风道具有螺旋形的漂亮外观，可免吊顶，从而降低了工程造价。送新风和排气，将有害气体排出室外，把室外新鲜空气送室内。一般而言，通风系统的流量都很大，因此要求使用阻力较小的空气输送管道，以节省造价和运行费用——就适用。一般情况下使用镀锌铁管，有腐蚀性及特别潮湿的场所使用不锈钢管。

Cold air and hot air are commonly used in central air conditioning pipes, which require insulation materials. It can also be internally bonded with thermal insulation materials to provide a spiral shaped and beautiful appearance for the air duct, eliminating the need for suspended ceilings, thereby reducing project costs. Supply fresh air and exhaust, discharge harmful gases outdoors, and send outdoor fresh air indoors. Generally speaking, the flow rate of a ventilation system is large, so it is required to use air delivery pipes with low resistance to save costs and operating expenses. This is applicable. Generally, galvanized iron pipes are used, and stainless steel pipes are used in corrosive and particularly humid places.

散装物料的输送在工厂的生产过程中，需要输送松散的颗粒，特别是比重不大的如发泡塑料粒之类，造价低，效果好。排油烟饭店、酒楼、烧烤店、宾馆的厨房有大量油烟产生，需要排出，使用不锈钢风管适用。集中供热工程热气管道，保温层的外层，使用不锈钢风管，使管道寿命长，质量好。

The transportation of bulk materials in the production process of the factory requires the transportation of loose particles, especially those with small specific gravity such as foam plastic particles, which has low cost and good effects. The kitchens of restaurants, restaurants, barbecue shops, and hotels that discharge lampblack have a large amount of lampblack that needs to be discharged. The use of stainless steel air ducts is suitable. For central heating projects, the outer layer of the thermal insulation layer of the hot gas pipeline uses stainless steel air pipes, which ensures long service life and good quality of the pipeline.