一般通风管道的规划及运用办法

发布人：http://www.sftfgd.com   发布时间：2023-06-09 15:20:50

通风管道是专门为一处或几处房间或设备送风和排风的管道。排烟管道是专门共排烟气的管道，就用处来讲有别离，就管道自身讲都是管道。下面济南风管加工厂为您讲解下一般通风管道的规划及运用办法。

A ventilation duct is a duct specifically designed to supply and exhaust air to one or several rooms or equipment. Smoke exhaust ducts are specialized ducts for co exhaust of smoke, which differ in terms of purpose. In terms of the ducts themselves, they are all ducts. Below, Jinan Air Pipe Processing Factory will explain to you the planning and application methods of general ventilation ducts.

通风管道是工业与民用修建的通风与空调工程用金属或非金属管道，是为了使空气流转，下降有害气体浓度的一种市政根底设备。

Ventilation ducts are metal or non-metallic ducts used in industrial and civil ventilation and air conditioning engineering, which are municipal infrastructure equipment designed to circulate air and reduce harmful gas concentrations.

风管制造与设备所用板材、型材以及其他首要制品资料，通风管道规划制造时，都应契合规划及相关产品现行规范的规则，并运用出厂查验合格证明，资料出场时应按现行有关规范进行查验。

The materials of plates, profiles, and other primary products used in the manufacturing of air ducts and equipment, as well as the planning and manufacturing of ventilation ducts, should comply with the rules of the current planning and relevant product specifications, and use factory inspection certificates. The materials should be inspected according to the current relevant specifications when leaving the site.

在通风管道设备的时分要关于风管的方位，高度，走向都要进行规划好，在风管的直径上面要求能够确保关于空气的更新的速度。

When using ventilation duct equipment, it is necessary to plan the orientation, height, and direction of the air duct, and ensure the speed of air renewal in terms of the diameter of the air duct.

关于风管的联接部分，要进行紧密联接，所选用的垫片的厚度应该不小于3mm,垫片不该凸入管内,亦不宜杰出法兰外。关于金属性的风管在转弯的时分要遵照严厉的设备要求。关于塑料软管在弯道时要留神不该该有死弯或许塌陷。

The connection part of the air duct should be tightly connected, and the thickness of the gasket used in the center should not be less than 3mm. The gasket should not protrude into the pipe, nor should it protrude outside the flange. Strict equipment requirements should be followed when turning metal ducts. Be careful not to have dead bends or collapses when making plastic hoses in bends.

风管设备前,应内、外杂物,并做好清洁和保护作业。一同关于风管的联接部分的螺丝的方位要尽或许的便当往后的修理。

Before the air duct equipment, there should be debris inside and outside, and cleaning and protection work should be done well. The orientation of the screws on the connecting part of the air duct should be as convenient as possible for future repairs.

通风管道作业时，会将外界新鲜空气顺畅带入室内。如在日常日子中或自界说场景发生的条件下,人们通过通风管道然后确保一些有烟雾或环境中一氧化碳通过空气流转得到稀,然后不让人们被有害气体烦扰。还有什么问题就来我们网站http://www.sftfgd.com咨询吧！

When working in ventilation ducts, fresh air from the outside will be smoothly brought into the room. In daily life or under the conditions of self defined scenarios, people use ventilation ducts to ensure that some smoke or carbon monoxide in the environment is diluted through air circulation, and then prevent people from being disturbed by harmful gases. If you have any further questions, please come to our website http://www.sftfgd.com Consult!