常见的几种空调通风管道清洗方法

发布人：http://www.sftfgd.com   发布时间：2023-07-07 09:27:37

1、机器人清洗方法

1. Robot cleaning methods

可使用真空吸尘设备、机器人控制系统、高压气体和其他辅助设备将粘附在管道内壁的灰尘，清出管道。

Vacuum cleaning equipment, robot control systems, high-pressure gas, and other auxiliary equipment can be used to remove dust adhering to the inner wall of the pipeline.

2、电动软轴清洗方法

2. Cleaning method for electric flexible shaft

在小型控制器驱动下，清洗窄小而多弯的支管道，实现自动正反转，自动拐三道弯以上，清洗长度在18米，其特点是外皮为可自润滑的塑料或橡胶材料护套，里芯是可长距离传递动力扭距的特型金属软轴。

Driven by a small controller, it can clean narrow and multi curved branch pipes to achieve automatic forward and reverse rotation, with an automatic turning of more than three turns. The cleaning length is 18 meters, and its characteristic is that the outer skin is a self-lubricating plastic or rubber material sheath, and the inner core is a special metal flexible shaft that can transmit power torque over a long distance.

3、人员清洗方法

3. Personnel cleaning methods

由于风道尺寸比较大，使用清洗设备的效率就不是很高。因此，我们采用做好防护的人员进入风道清洗，采用的设备是真空吸尘器，马达强劲吸力，吸尘管的长度可达30米，可快速的完成。

Due to the large size of the air duct, the efficiency of using cleaning equipment is not very high. Therefore, we use personnel with proper protection to enter the air duct for cleaning. The equipment used is a vacuum cleaner, with a strong suction motor and a suction pipe length of up to 30 meters, which can be quickly completed.

4、机组清洗方法

4. Unit cleaning method

高压冲洗机组冷热换热器、凝结水盘、过滤网、风机叶轮，用干毛巾把表面擦拭干净，并把机组内的杂物吸出。

High pressure flushing of the cold and hot heat exchanger, condensate tray, filter screen, and fan impeller of the unit, wipe the surface clean with a dry towel, and suck out any debris inside the unit.

5、部件清洗

5. Component cleaning

应对空调管道的送、回风口拆下清洗。

Remove and clean the supply and return air ports of the air conditioning pipeline.

下面济南通风管道厂家再来简单的讲讲清洗前的准备工作：

Next, the ventilation pipeline manufacturer in Jinan will briefly explain the preparation work before cleaning:

1、针对实际情况制定清洗方案。

1. Develop a cleaning plan based on the actual situation.

2、根据甲方要求，为每位施工人员办理出入证。

2. According to the requirements of Party A, apply for entry and exit permits for each construction personnel.

3、提前落实存放设备的场所，落实用水用电的位置，听从甲方安排。

3. Determine the location for storing equipment in advance, determine the location for water and electricity, and follow the arrangements of Party A.

4、再次强调施工、文明施工，增强意识。

4. Emphasize once again safe and civilized construction, and enhance safety awareness.

5、严禁在施工现场抽烟、严禁抄拿客户的任何物品、严禁赤膊作业。

5. Smoking is strictly prohibited on the construction site, taking any items from customers is strictly prohibited, and bare shirtless operations are strictly prohibited.

对于空调通风管道的清洗方式以及清洗注意事项就讲解到这里了，希望能够给您好的帮助，更多事项就来我们网站http://www.sftfgd.com咨询！

That's all for the cleaning methods and precautions of the central air conditioning ventilation ducts. We hope to provide you with good help. For more information, please visit our website http://www.sftfgd.com consulting service