白铁通风管道制作方法包括哪些？

发布人：http://www.sftfgd.com   发布时间：2017-09-19 16:38:35

1、查看风管板材放样是不是符合风管制造使命单的请求，划线是不是准确，板材有否损坏。

1, check the wind pipe plate lofting is not consistent with the requirements of the wind pipe manufacturing mission, whether the line is accurate, the plate is damaged.

2、查看刀具刀片装置是不是结实。

2, check whether the tool blade device is firm or not.

3、查看刀片伸出高度是不是符合请求。直刀刨刀片伸出高度应能堵截扳材，不伤桌面地毯；单刀刨刀片和双刀刨刀片伸出高度应能堵截上层铝箔和芯材，不伤下层铝箔。双刀刨两刀距离约2mm。

3, check the blade protrusion height is not consistent with the request. Straight knife blade height should be able to pull out to intercept the material, not to hurt the desktop carpet; single blade and double knife blade extending height should be able to cut off the upper layer of aluminum foil and core material, not to hurt the lower layer of aluminum foil. Double knife plane, two knives, about 2mm distance.

4、按切边请求挑选左45°单刀刨或右45°单刀刨。

4, according to the cutting edge request, select the left 45 degrees single knife plane or right 45 degrees single pole plane.

5、将板材放置在作业台上，方铝合金靠尺平行固定在恰当方位。

5. Place the sheet on the worktable, and square aluminum alloy is fixed in the proper direction according to the ruler.

6、手持刀具，将刀具基准边靠紧方铝合金靠尺，刨面压紧板材，刀具基准线对准放样线，向前推或向后拉刀具，直刀刨将板材堵截;单刀刨将板材切边;双刀刨将板材开槽。

6, hand tools, tool reference edge close party Aluminum Alloy ruler, planing surface pressing plate, cutter base line alignment lofting line, push forward or backward pulling tool, knife planing plate block; single planing plate cutting edge; double slotted knife plane plate.

7、板材堵截成单块风管扳后，将风管板编号，以防不一样风管的风管板搞错。

7. The sheet is cut off into a single block. After the wind is pulled down, the air duct plate is numbered to prevent the wind pipe from being confused.

8、对于曲折面的板材，用压弯机在压弯区内压槽。

8, for the tortuous surface of the plate, with bending machine in the bending zone groove.

本文的精彩内容由济南通风管道提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.sftfgd.com/我们有专门的客服为您解答问题

The wonderful content provided by Ji'nan ventilation pipeline to provide the knowledge, this website has a lot of exciting content, more content you can click to enter: http://www.sftfgd.com/ we have a dedicated customer service for you to answer the question