风管加工进程中会触及到的质量问题

发布人：http://www.sftfgd.com   发布时间：2023-04-17 14:19:58

通风管道是通风和空气调度体系的重要组成部分，大部分都是由管道加工设备（如通风管道出产线）制成。但是因为各种各样的原因，或许导致管道加工设备加工而成的通风管道呈现问题。下面济南风管加工厂来讲讲风管加工进程中会触及到的质量问题：

Ventilation ducts are an important component of the ventilation and air dispatch system, and most of them are made from pipeline processing equipment (such as ventilation duct production lines). However, due to various reasons, the ventilation ducts processed by pipeline processing equipment may present problems. Below, Jinan Air Pipe Processing Factory will discuss the quality issues that may be encountered during the air pipe processing process:

1、加工资料未达标

1. Processing data not up to standard

①体现：板材外表不平坦，厚度不均匀，有显着的压痕、裂纹、砂眼和锈蚀等状况；通风管道平面下沉，周围面向外凸起，有显着的变形。

① Embodiment: The surface of the board is uneven, with uneven thickness and significant indentation, cracks, sand holes, and rust; The ventilation duct sinks flat and protrudes outward, with significant deformation.

②影响：作业时通风管道漏风，空调负荷增加，一同风寿数和功用被影响。

② Impact: During operation, the ventilation duct leaks, the air conditioning load increases, and the lifespan and function of the ventilation system are affected.

③原因：资料不合格，不能满意制造通风管道的需求。

③ Reason: The information is not qualified and cannot meet the demand for manufacturing ventilation ducts.

④办法：在运用风管加工设备制造通风管道前，要先查看资料出厂合格证书和资料质量证明还有外观厚度等，确保资料是可用的。

④ Method: Before using air duct processing equipment to manufacture ventilation ducts, it is necessary to first check the factory certificate, quality certificate, appearance thickness, etc. of the materials to ensure that they are available.

2、通风管道翘角及弯头视点禁绝

2. Prohibit the viewing point of ventilation duct warping angles and bends

①体现：矩形通风管道两相对平面、两头面不平行；折角不平直；对角线不相等；咬口不严。

① Reflection: The rectangular ventilation duct has two opposite planes and two end faces that are not parallel; Uneven bending angle; Diagonal inequality; The bite is not tight.

②影响：会使通风管道联承受力不均匀，设备后的通风管道不平直，法兰盘垫片不紧密，体系漏风，构成空调负荷丢掉，而且缩短运用寿数。

② Impact: It will cause uneven bearing capacity of the ventilation ducts, uneven ventilation ducts behind the equipment, loose flange gaskets, and system air leakage, resulting in loss of air conditioning load and shortened service life.

③原因：板下料放样禁绝确；通风管道两两平行，相对面的板料长度和宽度不相等。

③ Reason: The cutting and layout of the board are strictly prohibited; The ventilation ducts are parallel in pairs, and the length and width of the opposite panel are not equal.

④办法：翻开下料时，应对板料严厉角方，对每片板料的长度、宽度以及查验对角线，使它们的差错操控在容许规模内；下料后的板料，应将通风管道相对面的两片板料重合查验规范性。

④ Method: When opening and cutting, the sheet should be strictly angled, and the length, width, and diagonal of each sheet should be checked to ensure that their error handling is within the allowable scale; After cutting, the two plates on the opposite side of the ventilation duct should be overlapped and checked for standardization.

风管加工进程中会触及到的质量问题相关内容就讲解到这里了，希望能够帮助到您，更多事项就来我们网站http://www.sftfgd.com咨询了解吧！

That's all for the quality issues that may arise during the processing of air ducts. We hope it can help you. For more information, please come to our website http://www.sftfgd.com Consult and understand!